34825-0124 Datasheet: Key Electrical & Mechanical Specs
The 34825-0124 datasheet defines the electrical and mechanical limits critical for determining whether this 12-position, 2.00 mm pitch through-hole header meets rigorous design requirements for current, voltage, and thermal stability. Correct interpretation of these specifications minimizes field failures and optimizes design margins.
Product Overview & Key Identifiers
Form Factor and Applications
This component features a 12-position, 2.00 mm pitch (approx. 0.079") through-hole configuration, ideal for wire-to-board and board-to-board signal distribution. Common applications include:
Stable signal routing in automated systems.
Signal interfaces for sensor networks.
Electrical Specifications & Performance
| Parameter | Performance Metric | Design Guidance |
|---|---|---|
| Current Rating | Continuous Ampacity per contact | Apply 10–30% thermal derating for high-temp environments. |
| Contact Resistance | Measured in Milliohms (mΩ) | Verify stability post-mating cycles to ensure signal integrity. |
| Insulation Resistance | Measured in Megaohms (MΩ) | Check after humidity exposure to prevent leakage paths. |
| Dielectric Withstand | Voltage Withstand Rating | Validate based on system peak voltage and dwell time. |
Environmental & Reliability Metrics
Operating Temperature Range Reliability
Mechanical Endurance
Rated for >500 mating cycles in professional configurations.
Vibration Resistance
High G-rating suitable for automotive stress profiles.
Mechanical Details & PCB Integration
Footprint & Tolerances
Extract hole sizes and keep-out zones directly from the dimensional drawing. Ensure drill diameter ± tolerance accounts for plating thickness to avoid solder joint failure.
- •Verify Pitch: 2.00 mm center-to-center.
- •Annular Ring: Follow CAM data recommendations.
Assembly Considerations
For wave soldering, maintain strict adherence to temperature-time exposure limits. Use mechanical reinforcement like glue fillets or retention tabs for high mating force applications.
- •SMT vs. Through-Hole: PTH provides superior mechanical strength.
- •Orientation: Keyed features prevent reversed mating.
Pre-Production Validation Checklist
Confirm drawing revision matches the ordering part number to avoid dimension mismatches.
Execute thermal soak tests on populated boards to validate derating under load.
Verify contact resistance post-soldering to ensure process quality.
Maintain lot/date code traceability for all incoming inspection cycles.
Frequently Asked Questions
Summary
Treat the 34825-0124 datasheet as the primary authority for matching electrical performance, mechanical footprint, and reliability thresholds to your specific engineering goals. By focusing on drawing revisions, electrical characteristics, and disciplined testing procedures, you ensure a robust integration that reduces both assembly surprises and field failures.
