501189-2010 connector Datasheet: Full Specs & Pinout
Compact 1.00 mm‑pitch, 20‑way receptacle housings account for a large share of signal interconnects in compact consumer and industrial electronics due to their space efficiency and reliable crimp terminations. This article delivers a complete breakdown of the 501189-2010 connector — full specs, manufacturer datasheet guidance, and a clear pinout for wiring and troubleshooting.
Quick Overview & Part Identification
Key Specs Snapshot
- One-line summary: Pitch 1.00 mm; Positions 20; Rows 2; Housing: receptacle; Termination: crimp; Contact gender: socket/female.
- Critical Check: Confirm full part number, pitch, row count, and mating orientation before PCB footprint design.
Typical Applications
Ideal for small form‑factor PCB interconnects and sensor harnesses. This form factor is chosen for high-density space savings where current per pin is modest, reducing assembly time and cost.
Full Electrical & Mechanical Specifications
| Category | Parameter | Specification Details |
|---|---|---|
| Electrical | Current & Voltage | Low-voltage signaling (Refer to datasheet for specific Ampere rating per pin) |
| Resistance | Low contact resistance (measured in milliohms); High insulation resistance | |
| Mechanical | Pitch & Configuration | 1.00 mm Pitch, 20 Positions, Dual Row (2x10) |
| Mounting Style | Crimp Termination, Receptacle Housing | |
| Durability | Standard mating cycles as per manufacturer reliability tests |
Performance Characteristics (Relative Scale)
Pinout & Wiring Diagram
Pin Numbering Convention
Consistent pin numbering and row labeling (A/B) is essential. Datasheet mechanical drawings show top/bottom views for pins 1–20. Always provide both schematic and physical views to avoid reversed connections.
Wiring Best Practices
Use correct crimp flange orientation and confirm visual polarization features before integration. Proper strain relief extends the lifecycle of the 1.00 mm pitch assembly.
Assembly & Crimp Guidance
Select terminals matching the housing series and conductor AWG. Perform insertion checks (audible click) and verify retention force. Route harnesses away from sharp edges to prevent insulation damage.
Testing & Reliability
Test sequences should include contact resistance after cycling, vibration, and thermal shock. Document RoHS/halogen status and operating temperature ranges to ensure regulatory compliance.
Use Cases & Troubleshooting
Summary & Next Steps
The 501189-2010 connector combines 1.00 mm pitch, 20 positions, and a compact 2‑row receptacle ideal for low‑voltage signal harnesses. Consult the manufacturer datasheet for definitive limits.
- ✔ Confirm mechanical identifiers (1.00 mm pitch, 2-row) to prevent layout errors.
- ✔ Verify electrical limits (contact resistance, rated current) for safety margins.
- ✔ Apply assembly checks (audible click, retention test) to ensure reliability.
