43045-1800 Datasheet Deep Dive: Specs, Pinout & Tests

7 February 2026 127

Strategic Insight: Accurate interpretation of the 43045-1800 datasheet is essential to avoid common causes of PCB rework such as footprint or pinout errors. This deep dive translates technical drawings into actionable specs, footprint guidance, and validation procedures to accelerate time-to-market.

Datasheet Overview: At-a-Glance Specs

43045-1800 Datasheet Deep Dive: Specs, Pinout & Tests

Physical & Mechanical Highlights

Extracting core mechanical connector specifications is the baseline for a successful PCB layout. We focus on the 3.00 mm pitch and the 18-position dual-row configuration.

Specification Value Datasheet Reference
Pitch 3.00 mm / 0.118" Mechanical Drawing
Layout 2 × 9 (18 Positions) Ordering Info
Orientation Right-Angle / Through-Hole Product Description
Housing Material High-Temp Thermoplastic (UL 94 V-0) Materials Section

Electrical Ratings & Material Integrity

Nominal electrical ratings should be identified early. These include current/voltage limits, contact resistance, and insulation parameters. Always flag missing or ambiguous values for supplier clarification before layout release.

Pinout & Footprint Analysis

Pin Numbering Convention

// Top View - Silkscreen Orientation
Row A: [01] [02] [03] [04] [05] [06] [07] [08] [09]
Row B: [10] [11] [12] [13] [14] [15] [16] [17] [18]

[Board Edge Reference] <----------

PCB Land Pattern & IPC Alignment

Follow IPC-7351 guidelines for land patterns. For Through-Hole Technology (THT) right-angle headers, hole drilling vs. plating tolerances are critical.

Drill Hole

Follow datasheet specs; typically +0.05–0.10 mm clearance over lead diameter for optimal plating.

Annulus Diameter

Standard IPC Level B/C baseline; ensures sufficient copper for robust solder fillets.

Solder Mask Keepout

Clear area equal to pad diameter +0.3 mm to prevent solder bridging or mask interference.

Variant & Ordering Considerations

Variant Code Pitch Orientation Plating Recommended Use-Case
43045-1800-T 3.00 mm Right-angle Tin General Signal-Level PCB
43045-1800-G 3.00 mm Right-angle Gold High-Reliability / Industrial

*Confirm specific manufacturer suffixes for exact contact finishes.

Validation & Testing Procedures

! Electrical Verification Matrix

Test Category Equipment Used Pass Criteria
Contact Resistance 4-wire micro-ohmmeter ≤ Max Datasheet Value
Insulation Resistance Insulation Megohmmeter ≥ 1000 MΩ (Typ.)
Dielectric Withstand Hipot Tester No Breakdown @ Rated V

PCB Integration & Assembly

Soldering Considerations

  • Maintain specific wave-solder profiles for high-temp thermoplastic.
  • Ensure lead protrusion is within 1.0mm - 1.5mm for inspection.
  • Use selective solder for mixed-technology boards to protect adjacent SMT components.

Mechanical Reinforcement

  • Consider solderable hold-downs for high-vibration environments.
  • Add polarizing keys to prevent mating errors in the field.
  • Design clearance zones around the connector for manual unplugging.

Frequently Asked Questions

What is the maximum current rating for the 43045-1800? +
While it varies by wire gauge and circuit density, the series typically supports up to 5.0A - 8.5A per circuit. Always verify the specific de-rating curve in the current product specification document.
Is this connector compatible with lead-free reflow processes? +
Yes, the 43045 series is generally manufactured from liquid crystal polymer (LCP) or high-temp nylon capable of withstanding lead-free reflow temperatures (up to 260°C).
What is the standard mating cycle durability? +
The standard tin-plated variant is rated for approximately 30 mating cycles. For higher durability requirements, consider the gold-plated (30μ") variants which support significantly more cycles.

Pre-Order & Design Checklist

Verify Pitch: 3.00 mm / 0.118" strictly confirmed.
Validate 18-pos (2x9) pin count vs schematic symbols.
Check plating: Tin for cost, Gold for reliability.
Confirm Right-Angle orientation relative to board edge.

Summary

Translating the 43045-1800 datasheet into an actionable design plan prevents assembly surprises and shortens development cycles. By validating connector specs, confirming land-pattern alignment, and executing the defined test matrix, engineering teams can ensure repeatable high-quality production and robust field performance.